COAGULANT & FLOCCULANT


Coagulants and flocculants are formulated to assist in the solids/liquid separation of suspended particles in solution. Such particles are characteristically very small and the suspended stability of such particles (colloidal complex) is due to both their small size and to the electrical charge between particles. Conditioning a solution to promote the removal of suspended particles requires chemical coagulation and/or flocculation.

COAGULANT
PRODUCT CODE

DESCRIPTION          

S-1027i & S-1017

A liquid inorganic blended coagulant with a cationic charge. It is formulated with an inorganic polymer and cationic polymer (amine).


S-1025

An inorganic polymer (Aluminum Chloro Hydrate) formulated for use as a coagulant. S-1025 has been very successful in the replacement of alum, ferric chloride, ferric sulfate and other inorganic salts, as well as organic polymers.

S-1010

A liquid inorganic coagulant (Aluminum sulfate) with a cationic charge. It is formulated to promote the coagulation of precipitated particles and assist in their rapid settling during wastewater treatment.

S-1032

 
A Ferric chloride based liquid coagulant with a cationic charge

S-1050

Alkalinity adjuster for raw water after demineralised treatment  such as thermal desalination etc.

S-1040, S-1040L

A Ferric sulfate based liquid coagulant

FLOCCULANT  PRODUCT CODE


DESCRIPTION

S-1101

A liquid organic acrylamide copolymer with a medium anionic charge.

S-1102EM

Anionic emulsion EM 533, anionic flocculant emulsion


S-1114 & S-1119

Cationic Flocculant (powder). Medium molecular weight, medium charge

S-1201

Non-ionic Flocculant (powder)